Mitsubishi FR - S500 - E2 PROM Write Selection (N12 )

150
Communication parameters
2.15.4 E
2
PROM write selection (n12 )
The parameter number in parentheses is the one for use with the parameter unit (FR-
PU04).
You can choose whether the parameters are stored into the E
2
PROM or not at
the parameter setting for computer communication. When performing parameter
write frequently, write them to the RAM.
Parameter Name
Factory
Setting
Setting
Range
Remarks
n12 (342)
E
2
PROM write
selection
00, 1
0: Written to RAM and E
2
PROM
1: Written to RAM only
Not written to E
2
PROM*
Setting is enabled when Pr. 30 = "1"
REMARKS
*When the parameter setting is "not written to E
2
PROM" (setting=1), the settings return to the
original values (values saved in the E
2
PROM) at power-on reset or terminal reset.