Mitsubishi FX3G-485-BD - For Non-Applicable Versions (Setting an Alternative Model)

H-8
FX Series PLC User's Manual - Data Communication Edition
Programming Communication
1 Outline
1.4 Programming Tool Applicability
1.4.2 For non-applicable versions (setting an alternative model)
Even software not applicable to a PLC can create programs when an alternative model is set.
In this case, however, programming is enabled only in the ranges provided for the alternative PLC model
such as instructions and program size.
*1. When performing communication using the standard built-in USB port, use a programming tool whose
version supports the FX
3G Series.
*2. "FX
2N" is selected when the FX-10P is used.
Model to be programmed Model to be set Priority: High → Low
FX
3UC Series FX3UC → FX2N → FX2(FX)
FX
3U Series FX3U, FX3UC → FX2N → FX2(FX)
FX
3G Series
*1
FX3G →
FX
1N
*2
→
FX
2N
*2
FX2NC Series FX2NC, FX2N → FX2(FX)
FX
2N Series FX2N → FX2(FX)
FX
1NC Series FX1NC, FX1N → FX2N → FX2(FX)
FX
1N Series FX1N → FX2N → FX2(FX)
FX
1S Series FX1S → FX2(FX)
FX
0N Series FX0N → FX2(FX)
FX
0S Series FX0S → FX2(FX)
FX
0 Series FX0 → FX2(FX)
FX
2C Series FX2C, FX2(FX) → FX2(FX)
FX
2(FX) Series FX2(FX) → FX2(FX)
FX
1 Series FX1