④
Wireless remote control (continued)
2. Setting details
The following functions can be set.
Button Number indicator Function setting
FAN SPEED
00 Fan speed setting : Standard
01 Fan speed setting : Setting 1 *
02 Fan speed setting : Setting 2 *
MODE
00 Room heating temperature adjustment : Disable
01 Room heating temperature adjustment : +1°C
02 Room heating temperature adjustment : +2°C
03 Room heating temperature adjustment : +3°C
FILTER
00 Filter sign display : OFF
01 Filter sign display : 180 hours
02 Filter sign display : 600 hours
03 Filter sign display : 1000 hours
04 Filter sign display : Operation stop after 1000 hours have elapsed
U/D
(Up/Down)
00 Anti draft setting : Disable
01 Anti draft setting : Enable
SILENT
00 Infrared sensor setting (Motion sensor setting) : Disable
01 Infrared sensor setting (Motion sensor setting) : Enable
HI POWER
00 Infrared sensor control (Motion sensor control) : Disable
01 Infrared sensor control (Motion sensor control) : Power control only
02 Infrared sensor control (Motion sensor control) : Auto OFF only
03 Infrared sensor control (Motion sensor control) : Power control + Auto OFF
ON TIMER
00 Cooling fan residual-period running : Disable
01 Cooling fan residual-period running : 0.5 hours
02 Cooling fan residual-period running : 2 hours
03 Cooling fan residual-period running : 6 hours
OFF TIMER
00 Heating fan residual-period running : Disable
01 Heating fan residual-period running : 0.5 hours
02 Heating fan residual-period running : 2 hours
03 Heating fan residual-period running : 6 hours
NIGHT
SETBACK
00 Remote control signal receiver LED : Brightness High
01 Remote control signal receiver LED : Brightness Low
02 Remote control signal receiver LED : OFF
* Refer to page 173.
To Next Page
Loading...
