Mitsubishi L200 User Manual

2. To install the bulb, perform the removal
steps in reverse.
Side turn-signal lamps
E01003900037
1. To
remove a side turn-signal lamp, insert a
straight blade (or minus) screwdriver at the
end of the lamp nearer the front of the body
and use it to gently lever the lamp out of the
body.
Front
NOTE
l
Wrap
a piece of cloth around the tip of the
screwdriver in order to avoid scratching the
lens and the body.
2. Remove
the socket and bulb assembly togeth-
er by turning it anticlockwise, and then re-
move the bulb by pulling out.
3. To
install the bulb, perform the removal
steps in reverse.
NOTE
l
When replacing the lamp assembly, push in
the end facing the rear of the vehicle first.
Front
Front fog lamps*
E01004001537
1. Insert
a straight blade (or minus) screwdriver
with a cloth over its tip at the edge of the cov-
er and pry gently to remove the cover.
Type 1
Type 2
Maintenance
8-28
8
OCRE12E1

Mitsubishi L200 Specifications

General

Brand	Mitsubishi
Model	L200
Category	Automobile
Language	English