1. PRE-OPERATION INFORMATION
1-6
1.4 Transportation
When carrying, always support the whole drive unit.
1.5 Storage
Store the drive unit in the following environment.
Ambience
No corrosive gas, flammable gas, oil mist, dust and dirt.
No exposure to direct sunlight. No salt.
Ambient temperature
-10
°
C to +50
°
C (non-freezing)
Storage temperature
-20
°
C to +65
°
C (applies to short-time transit)
Ambient humidity
90%RH or less (non-condensing)
Vibration
5.9m/s
2
(conformance with JIS C 0040)
NOTICE
If the specification value of humidity is satisfied, condensation and/or freezing will
occur in places where temperatures vary greatly. Avoid storing the equipment in
such places.
Avoid placing the unit directly on the floor. Place it on a stand or shelf.
Get other manuals https://www.bkmanuals.com
To Next Page
Loading...
Need help?
General
