Mitsubishi MELSEC FX3U Series User Manual

4 Conversion of the Projects
4.1 Operation Method for Replacing Projects
33
4
Operating procedure
1. Start up GX Works3.
2. Open the project of FX3U/FX3UC.
Select [Project][Open Other Format File][GX Works2 Format][Open Project]Project (***.gxw).
3. The following message is shown. After checking the contents, press the [OK] button.
• The display contents may vary depending on the version of the software.
• Precautions for the converted project are displayed. Please read carefully through the contents before use.

Mitsubishi MELSEC FX3U Series Specifications

General

Brand	Mitsubishi
Model	MELSEC FX3U Series
Category	Controller
Language	English