Setting the air filter
The air filter is supplied with the unit at time of
purchase. Fit the air filter before using the unit.
1
Remove the air filter from the
polyethylene bag.
2
Remove the front panel and pre-
filter.
3
Fit the air filter into the pre-filter.
With the strips facing up, set the air filter
inside the tabs on the pre-filter.
Strips
Tabs (6)
4
Attach the pre-filter and front
panel.
Front panel Pre-filter
Performance is unaffected even if
the metal fins inside the main unit
are slightly bent.
1 Remove holding
the bottom.
2 Remove
holding
the tabs.
Front panel Pre-filter
Performance is unaffected even if
the metal fins inside the main unit
are slightly bent.
1 Remove holding
the bottom.
2 Remove
holding
the tabs.
Things to Be Aware of
Before Using Your Dehumidifier
How does the dehumidifier
work?
If you pour cold water into a cup, the air around
it becomes cold, causing water droplets to form
on the surface of the cup.
The dehumidifier takes advantage of this
phenomenon to remove moisture from the air.
1 The unit draws air from the room, cools it
with its cooling coil, causing the moisture to
transform into water droplets.
2 The water droplets fall into the water tank.
3 The dehumidified air is reheated by the
heating coil, and then discharged.
The humidity of the room is thus reduced by
repeating steps 1, 2, and 3.
Room temperature may rise 2-4°C
during operation
The dehumidifier does not have a cooler function.
Due to heat produced during operation, the room
temperature may rise 2–4°C. As a result, the unit may
blow warm air, but this is not due to a malfunction.
During winter, the air may not feel warm as the
temperature is below body temperature.
The humidity reading on the unit
may differ from a hygrometer in
the same room
Even in the same room, temperature and humidity
levels may differ from place to place. If the hygrometer
and the unit are in different parts of the room, the
humidity levels are prone to differ. Moreover, humidity
levels differ between places that have good and no
airflow.
Use the reading on the unit as an estimate.
<Cause>
Inconsistencies in
temperature and
humidity
Difference in
location
Difference in
hygrometer
accuracy
l
l
l
1 Attach holding
the tabs.
2 Hook the top edge
to the top part of
the unit and push
the bottom in.
Dried (warm) air
Cooling coil
Re-heating coil
Moist air
Compressor
Water tank
1
2
3
W
h
y
a
r
e
t
h
e
y
d
i
f
f
e
r
e
n
t
?
To Next Page
Loading...
Need help?
General
