Troubleshooting
Maintenance
Do not use detergents, cleaning agents for heat exchange equipment, abrasive powders, chemically treated dusters,
gasoline, benzene, thinners or other solvents, as they can damage the unit or the water tank, which may result in
leakage.
Cleaning
Water tank • Main unit
Wipe with a soft cloth.
Floating element
Do not remove or dismantle.
The unit draws in dust present in the air, and this
may cause the tank to gradually become dirty.
If the dirt does not come off easily, wash with
cold or warm water, then wipe with a soft, dry
cloth.
Mildew may form in the tank unless kept clean.
l
l
Once every two weeks
Pre-filter
Debris clogging the pre-filter reduces the
effectiveness of the dehumidifier. Clean once every
2 weeks.
For maintenance procedures see
10
1
Remove the front panel and
pre-filter.
2
Remove the air filter.
3
Clean the pre-filter.
4
Fit the air filter.
5
Attach the pre-filter and front
panel.
Remove grit with
vacuum cleaner
To Next Page
Loading...
Need help?
General
