AUTO
Setting Modes
When you want to set the humidity level.
Press
Frame appears around
AUTO.
AIR PURIFIER
To operate only the air purifier.
Press
Air purifier lamp lights.
The MODE button can also be used to select
AUTO.
To return to the previous mode, press the air
purifier button again.
l AUTO
The unit maintains the humidity level
by automatically controlling airflow and
operating intermittently as necessary. All
you have to do is set the humidity level.
The unit turns off when current humidity
decreases past the set humidity level, and
restarts when the level is exceeded. (airflow
and louvre stops)
The unit operates for 6 minutes continuously
regardless of the humidity level immediately
after turning the power on.
•
•
Information
Frequent use of exits and room size/conditions
may cause the humidity to not reach the set
level.
<To view set humidity level/To set
humidity level>
Pressing the button once displays
the set humidify level with the
indicator.
After 3 seconds, the
display returns to
the current humidity
display.
Pressing the button while
is displayed sets
the humidity level. Each time the
button is pressed, the humidity
setting changes.
•
•
Press
Press
again
l AIR PURIFIER
The unit cleans the air by passing it
through the pre-filter and air filter. The
dehumidifying function is disabled.
Information
The air passes through the air filter in all
modes, cleaning the air even if the air
purifier lamp is not lit.
Cigarette smoke and toxins found in smoke,
such as carbon monoxide, cannot be
removed with these filters.
l
l
To Next Page
Loading...
Need help?
General
