15- Tyre pressure monitoring system warn-
ing lamp* ® p. 6-101
16- Brake warning lamp ® p. 5-50 17- Information screen display list
® p. 5-30
Information screen display list
E00523900318
When there is information to be announced, such as lamp reminders, a sound is emitted and the screen switches to the displays shown below.
Refer to the appropriate page and take the necessary measures.
When the cause of the warning display is eliminated, the warning display goes out automatically.
Refer to “Warning display list” on page 5-30.
Refer to “Navigation information display” on page 5-42.
Refer to “Other interrupt displays” on page 5-42.
NOTE
l
A warning may be displayed on the information screen and the buzzer may sound in the following rare cases.
This is caused by the system picking up interference such as noise or strong electromagnetic waves, and is not a functional problem.
•
An extremely strong electromagnetic wave is received from a source such as an illegal radio set, a spark from a wire, or a radar station.
•
Abnormal voltage or a static electricity discharge is generated by the operation of installed electrical equipment (including after-market parts).
If the warning display appears many times, we recommend you to consult a MITSUBISHI MOTORS Authorized Service Point.
Warning display list
E00524002121
Screen Cause Solution (Reference)
l
You have forgotten to turn off the lamps.
l
Refer to “Lamps (headlamps, fog lamp,
etc.) auto-cutout function” on page 5-55.
Indication lamp, warning lamp, and information screen display list (multi information display - Type 1)
5-30
OGFE16E1
Instruments and controls
5
To Next Page
Loading...
