Multi-information meter switch
E00520000679
Each time the multi-information meter switch is op-
erated, a sound is emitted and the multi-informa-
tion display changes between information such as
warnings, odometer (Type 1), tripmeter, service re-
minder, engine coolant temperature (Type 1), aver-
age and momentary fuel consumption, driving
range, and average speed.
It is also possible to change elements such as the
language and units used on the multi-information
display by operating the multi-information meter
switch.
mark display screen (when
the ignition switch is “OFF”)
E00520100579
If you press the multi-information meter
switch and return from the warning dis-
play screen to the previous screen, the
mark is displayed.
Refer to “To return to the screen dis-
played before the warning display” on
page 3-07.
This mark is also displayed if there is an-
other warning other than the one dis-
played. When the cause of the warning
display is eliminated, the mark goes
out automatically.
NOTE
l
When the mark is displayed,
the warning display screen can be
redisplayed on the information
screen.
Refer to “Information screen
(when the ignition switch is
“OFF“)” on page 3-06.
Refer to “Information screen
(when the ignition switch is
“ON”)” on page 3-10.
Information screen (when the ignition
switch is “OFF“)
E00520200684
Each time you lightly press the multi-information
meter switch, the display screen switches in the fol-
lowing order.
Type 1
Type 2
When there is no
warning display
When there is a
warning display
When there is no
warning display
When there is a
warning display
1-
Odometer (Type 1)/Tripmeter
2-
Odometer (Type 1)/Tripmeter
3- Service reminder
4- Redisplay of a warning display screen
Instruments and controls
3-06
3
To Next Page
Loading...
Need help?
General
