Refer to “Warning display list (when the ignition
switch is “OFF”)” on page 3-27.
1- Information generated
2- Cause eliminated
To return to the screen displayed before the warn-
ing display
Even if the cause of the warning display is not elim-
inated, you can return to the screen that was dis-
played before the warning display.
If you press the multi-information meter switch,
the display screen switches to the screen that was
displayed before the warning display and the
mark (A) is displayed.
NOTE
l
Warning display screens with a “ ” or “ ”
mark displayed in the upper right of the
screen can be switched. If you want to switch
the display, press the multi-information me-
ter switch as follows.
“ ”: Press lightly.
“ ”: Press for about 2 seconds or more.
Redisplay of a warning display screen
When the
mark is displayed, if you lightly press
the multi-information meter switch a few times, the
warning display screen you switched from is dis-
played again.
Refer to “Information screen (when the ignition
switch is “OFF“)” on page 3-06.
Door ajar warning display screen
(when the ignition switch is “OFF”)
E00520600356
If any of the doors or the tailgate is not completely
closed, this displays the open door or tailgate.
1- Doors and tailgate are closed
2- Doors or tailgate is open
Instruments and controls
3-08
3
To Next Page
Loading...
Need help?
General
