EasyManuals Logo

Mitsubishi OUTLANDER Owner's Manual

Mitsubishi OUTLANDER
434 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
All of the keys provided with your new vehicle
have been programmed into the vehicle’s electron-
ics. Refer to “Keyless operation system: Ignition
switch” on pages 1-12 and 1-19.
NOTE
l
If you lose one of the keyless operation keys,
contact a MITSUBISHI MOTORS Author-
ized Service Point as soon as possible.
To obtain a replacement or extra spare key,
take your vehicle and all remaining keys to
your MITSUBISHI MOTORS Authorized
Service Point. All the keys have to be re-reg-
istered in the immobilizer computer unit.
The immobilizer can register up to 4 differ-
ent keys.
Ignition switch
E00307400430
To prevent vehicle theft, only the emergency key
with the preregistered keyless operation key inser-
ted can start the engine. (Electronic immobilizer
function)
Also refer to “Starting and driving: Starting the en-
gine” on pages 4-15 and 4-15.
LOCK
The engine is stopped and the steering wheel
locked. The emergency key can be inserted and re-
moved in this position.
ACC
The engine is stopped, but the audio system and oth-
er electrical devices can be operated.
ON
The engine is running, and all the vehicle’s electri-
cal devices can be operated.
START
The starter motor operates. After the engine has star-
ted, release the emergency key and it will automati-
cally return to the “ON” position.
NOTE
l
The keyless operation key is equipped with
an electronic immobilizer. To start the en-
gine, the ID code which the transponder in-
side the key sends must match the one regis-
tered in the immobilizer computer.
Refer to “Electronic immobilizer (Anti-theft
starting system)” on page 1-18.
When turning from “LOCK” to “ACC”
1. Take the emergency key out of the keyless op-
eration key. Refer to “Emergency key” on
page 1-18.
2. Remove the ignition switch cover while press-
ing the lock release button (A).
3. Insert the emergency key into the ignition
switch, and turn while pushing.
NOTE
l
If the ignition switch will not turn from the
“LOCK” to the “ACC” position, lightly turn
the steering wheel right and left while turn-
ing the ignition switch.
Locking and unlocking
1-19
1

Table of Contents

Other manuals for Mitsubishi OUTLANDER

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi OUTLANDER and is the answer not in the manual?

Mitsubishi OUTLANDER Specifications

General IconGeneral
BrandMitsubishi
ModelOUTLANDER
CategoryAutomobile
LanguageEnglish

Related product manuals