Mitsubishi PAC-SF44SRA User Manual

Mitsubishi Electric Building
Air Conditioning Control System
System remote controller Type PAC-SF44SRA
INSTRUCTION BOOK
Carefully read this book before use. It is recommended to safe keep this book for future reference.
ANWEISUNGSHANDBUCH
Vor Benutzung der Anlage dieses Buch sorgfältig durchlesen. Es wird empfohlen, dieses Buch zum Nachschlagen an einem
sicheren Ort aufzubewahren.
MANUEL D'UTILISATION
Lire attentivement le présent manuel avant toute utilisation et le conserver dans un endroit sûr pour pouvoir le consulter
ultérieurement.
LIBRO DE INSTRUCCIONES
Lea cuidadosamente este libro antes de usar el temporizador. Le recomendamos que guarde el libro en lugar seguro en previsión
de consultas Futuras.
LIBRETTO ISTRUZIONI
Leggere attentamente questo libretto prima dell'uso. Si raccomanda di tenerlo in un luogo sicuro per ogni futura necessitá.
INSTRUCTIEHANDLEIDING
Lees deze handleiding aandachtig door voordat u het apparaat in gebruik neemt. Het wordt aangeraden om deze handleiding
zorgvuldig te bewaren om later, indien nodig, te raadplegen.
GBD
FE
INL

Mitsubishi PAC-SF44SRA Specifications

General

Brand	Mitsubishi
Model	PAC-SF44SRA
Category	Remote Control
Language	English

Summary

Operation

Collective Setting/Monitor Screen, Group Setting/Monitor Screen

Explains how to switch between collective and group operation modes.

Various Setting Methods

Covers various operational settings like ON/OFF, mode, fan speed, temperature, and more.

Troubleshooting

When "COLLECTIVE ON/OFF LAMP" and "ERROR CODE" are Flickering

Addresses situations where the system indicates a critical error with specific lamps and codes.

When "Group Operation Status Display" and "Error Code" are Flickering

Explains troubleshooting when the group status and error codes flicker, indicating a potential problem.

Initial Settings

When This Controller is Master System

Guides through initial settings when this controller acts as the master system.

Setting the Group

Explains the process of registering indoor units, LOSSNAY, and controllers into groups.

Setting the Interlocked Units

Setting the Functions

Using with Master System Controller

Setting Local Remote Controller Operation Prohibit Function from This Controller

Prohibiting Operation of System Controller Other Than This Controller