Need help?Do you have a question about the Mitsubishi MA Series and is the answer not in the manual?
General| Type | Remote Control |
|---|---|
| Compatibility | Mitsubishi MA Series Air Conditioners |
| Frequency | Infrared |
| Operating Range | Approx. 7 meters |
| Battery Type | AA |
Built-in timer for on/off and temperature settings.
Enables checking data on site, reducing maintenance time.
Dot LCD and multi-language display for clear operation information.
Functions like temperature limits, auto off timer, and operation lock.
Displays maintenance information for compressor, indoor, and outdoor units.
Allows monitoring of maintenance data on the remote controller.
Monitors inverter models using stable-operation control.
Displays error codes in the service inspection monitor.
Shows the contact number for errors.
Supports English and seven other languages.
Allows setting temperature units to °C or °F.
Enables showing or hiding indoor room temperature.
Sets display of "COOL"/"HEAT" in auto mode.
Built-in weekly timer for on/off and temperature settings.
Disables buttons to prevent unauthorized changes.
Sets upper/lower limits for temperature to save energy.
Enables or disables the clock function.
Stops operation automatically after a preset time.
Sets on/off settings within 72 hours.
Sets the remote controller as main or sub.
Explains various indicators and displays on the remote controller.
Details the buttons and their functions on the remote controller.
Explains how to enter and use maintenance mode.
Details how to measure operation data in maintenance mode.
Explains single and multi refrigerant system addresses.
Lists functions that can be changed via remote controller.
Provides a step-by-step guide for function setting.
Describes different screens used in function setting.
Allows selection of display language.
Sets operation lock for buttons.
Sets whether auto mode is displayed.
Limits temperature settings.
Designates remote controllers as main or sub.
Sets timer functions (weekly, auto off, simple).
Sets contact number for error situations.
Adjusts display settings like temperature units.
Lists system functions by mode and setting number.
Lists indoor unit functions by mode and setting number.
Checks to perform before starting test run.
Procedure for performing test run with wired remote controller.
Lists symptoms and causes during test run.
Explains how to perform self-diagnosis.
Displays error code and unit number during operation issues.
Recalls latest check codes for maintenance.
Diagnoses remote controller if it cannot operate the air conditioner.
Explains how to access and monitor operation data.
Lists request codes for monitoring data.
Lists request codes for monitoring data.
Lists request codes for monitoring data.
Lists request codes for monitoring data.
Provides detailed contents for request codes.
Provides detailed contents for request codes.
Provides detailed contents for request codes.
Provides detailed contents for request codes.
Provides detailed contents for request codes.
Provides detailed contents for request codes.
Provides detailed contents for request codes.
Basic remote control operation for a single unit.
Using two remote controllers for one unit.
Controls multiple units simultaneously with one remote.
Allows remote start/stop and prohibits local control.
Controls and displays operation via external signals.
Displays operation state and controls from distance.
Enables timer control of start and stop.
Controls Lossnay ventilator by remote controller.
Centralized control via M-NET system.
Demand control via external input.
Provides detailed group control operation information.
Details operation with two remote controllers.
To Next Page