Mitsubishi MA Series User Manual

14
How to Lock the Buttons
(1)(5)
(2)
(3)
(4)
(6)(7)
■
Display ex am ple
CHANGE
LANGUAGE
FUNCTION
SELECTION
MODE
SELECTION
DISP MODE
SETTING
LOCKING
FUNCTION
SELECT
AUTO MODE
LIMIT TEMP
FUNCTION
* Displays the mode that is set in “Temperature Range Limit Setting”.
Lock All Except
ON/OFF
No limitation Lock All Buttons
4.2 Function Setting
4.2.1 Operation Lock (Operation Function Limit Setting)
The following settings can be made.
no1 :All buttons except for the [ON/OFF] button are locked.
no2 :All buttons are locked.
OFF (default) :No buttons are locked.
* To activate this operation lock function on the normal screen, hold down the
ON/OFF
button for two seconds while
holding down the
FILTER
( ) button.
(1) While pressing the
MODE
button, press the
ON/OFF
button for two seconds to activate the remote controller’s
function selection mode.
(2) Press the
MODE
button to select
FUNCTION
SELECTION
on the screen (at ).
[Display
]
(3) Press the
MENU
button until “LOCKING FUNCTION” appears on the screen (at ).
[Display ]
(4) Press the
ON/OFF
button until the desired lock mode appears on the screen (at ).
[Display
]
(5) While pressing the
MODE
button, press the
ON/OFF
button for two seconds to return to normal mode. Setting is
now complete.
Completing steps (1) to (5) allows use of the operation lock function.
To enable the lock function, carry out the following steps.

Mitsubishi MA Series Specifications

General

Brand	Mitsubishi
Model	MA Series
Category	Remote Control
Language	English