Mitsubishi Pick-Up 1987 User Manual

2D-4 Chapter 2 Part D General engine overhaul prmedures
2.6L engine (continued)
Torque specifications*
Jetvalves ..........................................
Main bearing cap bolts ................................
Connecting rod bearing cap nuts ........................
* Note: Refer to Part A for additional torque specifications.
2.OL and 2.4L engines
General
Displacement
2.OL ..............................................
2.4L ..............................................
Bore
2.OL ..............................................
2.4L ..............................................
Stroke
2.OL ..............................................
2.4L . .._._ ........................................
Cylinder compression pressure ...........................
Oil pressure (at 3000 rpm) ...............................
Cylinder head and valves
Head warpage limit
Standard ...........................................
Servicelimit ........................................
Valve margin width
intake
Standard .........................................
Servicelimit ......................................
Exhaust
Standard .........................................
Servicelimit ......................................
Valve stem diameter (intake and exhaust) ...................
Valve stem-to-guide clearance
1987 only
Intake
Standard .......................................
Service limit ....................................
Exhaust
Standard .......................................
Servicelimit ....................................
All others
Intake
Standard .......................................
Servicelimit ....................................
Exhaust
Standard .......................................
Service limit ....................................
Valve spring
Out-of-square limit ...................................
Pressure ...........................................
Installed height ......................................
Free length
1983 and 1984
Standard .......................................
Servicelimit ....................................
1985 on
Standard .......................................
Servicelimit ....................................
Jet valves
Stem diameter
1987through1989 .................................
All others ........................................
Face/seat angle
1987through1989 .................................
All others ........................................
Ft-lbs (unless otherwise indicated)
14
58
34
,
121.9 cubic inches
143.4 cubic inches
3.35 inches
3.41 inches
3.46 inches
3.94 inches
130 to 150 psi at 250 rpm
25 to 90 psi
0.002 inch
0.008 inch
0.047 inch
0.028 inch
0.079 inch
0.059 inch
0.3100 inch
0.0012 to 0.0020 inch
Not available
0.0020 to 0.0031 inch
Not available
0.0012 to 0.0024 inch
0.004 inch
0.0020 to 0.0035 inch
0.006 inch
3-degrees
72 Ibs (322 N)
I.591 inch
1.870 inch
Not available
1.960 inch
1.921 inch
0.1693 inch
Not available
45-degrees
Not available

Mitsubishi Pick-Up 1987 Specifications

General

Brand	Mitsubishi
Model	Pick-Up 1987
Category	Automobile
Language	English