Mitsubishi Q Series Programming Guide

APP -5 APP -5
A
PPENDICES
MELSEC-Q
Compatible CPU
No. Name Content Description
Setting Side
(Setting
Timing)
Basic model QCPU
High Performance
model QCPU
Process CPU
Redundant CPU
Universal model QCPU
SM331
Normal SFC program
execution status
OFF : Not executed
ON : Being executed
•
Indicates whether the normal
SFC program is being executed
or not.
•
Used as an execution interlock
of the SFC control instruction.
S (status
change)
2 4
SM332
Program execution
management SFC
program execution
status
OFF : Not executed
ON : Being executed
•
Indicates whether the program
execution management SFC
program is being executed or
not.
•
Used as an execution interlock
of the SFC control instruction.
S (status
change)
3 4 4
SM735
SFC comment
readout instruction in
execution flag
OFF : SFC comment
readout
instruction is
inactivated.
ON : SFC comment
readout
instruction is
activating.
• Turns on the instructions,
(S(P).SFCSCOMR) to read the
SFC step comments and (S(P).
SFCTCOMR) to read the SFC
transition condition comments.
System
(status
change)
1: Available with the CPU module whose function version is B or later
2: Applicable to the one whose first five digits of serial No. are "04122" or later.
3: Applicable to the one whose first five digits of serial No. are "07012" or later.
4: Applicable to the one whose first five digits of serial No. are "07032" or later.

Mitsubishi Q Series Specifications

General

I/O Points	Up to 4096 points
Communication	Ethernet, RS-232, RS-485
I/O Modules	Digital, Analog, Specialized
Programming Language	Function Block Diagram, Structured Text
Power Supply	24V DC, 100-240V AC
Operating Temperature	0°C to 55°C
Shock Resistance	147 m/s2 acceleration, 3 times in each of X, Y, and Z directions
Program Capacity	Up to 252K steps