A - 2 A - 2
REVISIONS
* The manual number is given on the bottom left of the back cover.
Print Date * Manual Number Revision
Feb., 2000 SH (NA) 080076-A First edition
May, 2001 SH (NA) 080076-B
Partial correction
Chapter 1, Section 3.1, Section 5.1.1, Section 5.2.4, Appendix 1.2
deletion
Appendix 2
Apr., 2002 SH (NA) 080076-C
Partial correction
Chapter 1, Chapter 2, Section 3.1, Section 5.1, Section 5.1.2, Section
5.2.4, Appendix 1.2
Mar., 2003 SH (NA) 080076-D Addition of use of MELSAP-L to Basic model QCPU (first five digits of
serial No. are 04122 or later).
Overall reexamination
Jun., 2004 SH (NA) 080076-E Addition of Redundant CPU
Partial correction
About Manuals, Chapter 1, Chapter 2, Section 3.12, 3.2.2, 3.3, 4.2, 4.2.8,
4.3.3, 4.3.5, 4.4, 4.4.1 to 4.4.11, 4.5, 4.7, 5.2, 5.2.1, 5.2.2, 5.3.1,
Appendix 1.1, Appendix 1.2, Appendix 2
May, 2005 SH (NA) 080076-F
Partial correction
About Manuals, Section 4.4.2, 4.4.9, 5.2.2, 6.6, Appendix 1.1
Addition
Section 3.3.2, 4.8, 4.8.1, 4.8.2
Changed item numbers
Section 3.3 Section 3.3.1
Apr., 2007 SH (NA) 080076-G
Addition of Universal model QCPU
Addition module
Q02UCPU, Q03UDCPU, Q04UDHCPU, Q06UDHCPU
Partial correction
About Manuals, GENERIC TERMS AND ABBREVIATIONS USED IN
THIS MANUAL, Chapter 1, Chapter 2, Section 3.1.2, 3.2.2, 3.3.1, 4.2,
4.4.1 to 4.4.11, 4.5 to 4.7, 5.2, 5.2.1, 5.2.2, 5.3.1, 6.6, Appendix 1.1, 1.2,
Appendix 2, Appendix 3
Dec., 2007 SH (NA) 080076-H
Partial correction
Section 6.3.2
Mar., 2008 SH (NA) 080076-I Addition of Universal model QCPU
Addition module
Q13UDHCPU, Q26UDHCPU
Partial correction
GENERIC TERMS AND ABBREVIATIONS USED IN THIS MANUAL,
CHAPTER 2, SECTION 3.1.2, 3.2.2, 3.3.1, 4.2, 4.2.8, 4.3.3, 4.4.5, 5.2.2
To Next Page
Loading...
Need help?
General
