Mitsubishi Q Series

4 - 43 4 - 43
4 SFC PROGRAM CONFIGURATION
MELSEC-Q
(2) The following program executes a step synchronously with another step of a parallel branch.
aS20 & bX0
S20
S5 S10S6
*
Related Instructions
1) SFC control instructions
• Block switching instruction (BRSET) .............................See Section 4.4.11.
• Step control instruction (SCHG) ....................................See Section 4.4.10.
• Active step batch readout instruction
(MOV(P), DMOV(P), BMOV(P)) ...................................See Section 4.4.4., Section 4.4.5
REMARKS
: Indicates that X0 is used as a user interlock condition.