To Next Page

To Previous Page

10-29

Chapter 10 COOLING SYSTEM

2.12.8 Body - Install

(1) Apply grease to the O-ring and install it to bearing case

and body.

(2) Attach the plate to bearing and install the body.

Body - Install

2.12.9 Impeller - Install

(1) Tap-in the impeller to shaft.

Note: The bend of impeller is as shown in the illustration.

Impeller - Install

2.12.10Cover - Install

Install the O-ring to body and install the cover.

Cover - Install

2.12.11Gear - Install

Install the drive gear and tighten the nut to the specified

torque. Bend the washer to rock.

Gear - Install

Plate

O-ring

Body

Bearing

case

Blade

Rotation

direction

Impeller

Apply a small amount

of white petrolatum to

sliding portion.

Cover

Drive gear

220 ± 10 N·m

{22.4 ± 1.0 kgf·m}

[162 ± 7.4 lbf·ft]

Mitsubishi S6R2 Series User Manual

Questions and Answers: