8-18
Chapter 8 PERIODIC INSPECTION AND MAINTENANCE PROCEDURES
Radiator Fins - Check and Clean
Check the radiator fins for holes and cracks.
To clean the radiator fins, blow compressed air from
the opposite direction of the normal air flow.
Note: If the specification of radiator differs from the
contents of this operation manual, follow the
manufacturer's operation manual.
Fig. 8-23 Radiator fins - Clean
When handling compressed air, wear safety goggles,
a hardhat, gloves and other necessary protective
gear. Working without wearing proper protective gear
could result in serious injuries.
To Next Page
Loading...
