Mitsubishi XL1X S L 2 User Manual (English)

Questions and Answers:

R
reneewilsonAug 13, 2025
Why is my Mitsubishi Projector power off?
- S
  Sara SimpsonAug 13, 2025
  Your Mitsubishi Projector might be off due to several reasons: * The air inlet, outlet grille, or air filter could be clogged. Remove any obstructions. * The power cord might be unplugged. Ensure it's properly plugged into both the outlet and the projector. * The main switch might be off. Turn it on. * The lamp lid might be open. Close it securely. * The projector might have been turned on too soon after being turned off. Wait for the lighting sequence. * If the power switch was turned off while the fan was running, try turning it on and off several times. * The room temperature could be too high, or the lamp might need replacing. * Also check that the lamp cover is properly closed. If the LAMP or TEMP indicator is on or blinking, the unit requires professional repair.
K
Kristina EvansAug 17, 2025
What to do if no picture appears on Mitsubishi XL1X S L 2 screen?
- B
  Brittany WalkerAug 17, 2025
  If no picture appears on your Mitsubishi Projector screen, consider these possible causes: * The lens cap might be on. Remove it. * The connected equipment might not be turned on. Ensure all devices are powered on. * The hookup might be incorrect. Double-check all connections. * The input source might be wrong. Select the correct source for your connected equipment. * The lamp might need replacing.
M
Michelle KingAug 21, 2025
What causes nothing to be displayed on the PC monitor connected to Mitsubishi Projector?
- K
  Kim JacobsAug 21, 2025
  If nothing is displayed on the PC monitor, the PC monitor might not be turned on. Turn on the monitor.
A
Amy GonzalezAug 25, 2025
How to fix no sound on Mitsubishi Projector?
- B
  Belinda ThomasAug 26, 2025
  If you're not hearing any sound from your Mitsubishi Projector, try these solutions: * The volume might be turned down. Increase the volume. * The connection to other equipment might be incorrect. Check the connections.
J
Joel WigginsAug 28, 2025
How to fix blurry image on Mitsubishi XL1X S L 2?
- C
  christine51Aug 28, 2025
  A blurry image on your Mitsubishi Projector can be due to several factors: * The projecting distance might be beyond the focused area. Adjust the distance. * The lens might be dirty. Clean the lens. * The screen size might exceed specifications. Reduce the screen size to within 30" to 300". * Brightness and contrast might not be adjusted correctly. Adjust them accordingly. * FINE adjustment might be incorrect. Make the FINE adjustment. * Tracking might need adjustment. Adjust the tracking. * The projector might not be at a right angle to the screen. Adjust the angle.
D
dbrooksSep 1, 2025
Why is the image distorted and noisy on my Mitsubishi XL1X S L 2 Projector?
- J
  John MartinSep 1, 2025
  Distorted images and noise on your Mitsubishi Projector screen can be caused by: * Loose cable connections. Ensure the connecting cable is securely plugged into the terminal. * Proximity to other equipment. Install the projector farther away from other equipment.
A
Aaron Alexander MDSep 4, 2025
How to brighten a dark image on Mitsubishi XL1X S L 2?
- K
  Kristen GarciaSep 4, 2025
  If the image on your Mitsubishi Projector is too dark, the brightness, tint, and color might not be adjusted correctly. Adjust these settings to improve the image.
J
Jeremiah MahoneySep 8, 2025
What to do if adjustments cannot be made on Mitsubishi XL1X S L 2?
- C
  Collin WardSep 8, 2025
  If adjustments cannot be made on your Mitsubishi Projector, the operation might be incorrect due to noise or interference. Press the reset button on the Terminal board.

Mitsubishi XL1X S L 2 Specifications

General

Brightness	1300 ANSI lumens
Native Resolution	XGA (1024x768)
Contrast Ratio	2000:1
Lamp Life	2000 hours / 3000 hours (Eco)
Weight	2.9 kg
Inputs	VGA, S-Video, Composite