What to do if my Mitsubishi WD380U-EST Projector power can not be turned on?
If your Mitsubishi Projector won't turn on, unplug the power cord from the wall outlet. After the projector has cooled off, plug the power cord back in, and then press the POWER button.
How to fix a Mitsubishi WD380U-EST when no image appears on the screen?
If no image appears on the screen of your Mitsubishi Projector, unplug the power cord from the wall outlet. Ensure the projector has cooled off, then plug the power cord back in and press the POWER button.
What to do if the Mitsubishi WD380U-EST Projector remote control doesn’t function?
If the remote control for your Mitsubishi Projector isn’t working well or at all, check if the remote control's batteries are weak.
What does it mean when my Mitsubishi Projector says “No signal”?
If your Mitsubishi Projector displays “No signal”, check if the projector is correctly connected to the input of the connected device, as the problem may be with the connected device.
Why are my Mitsubishi WD380U-EST Projector images shaking or displaced?
If the projected images from your Mitsubishi Projector are shaking or displaced, check if the connected device is properly connected to the projector.
What to do if the screen for entering the password appears on Mitsubishi WD380U-EST Projector?
If the password entry screen appears on your Mitsubishi Projector, enter the password or contact the person in charge of management of the projector.
What to do if the menu can’t be used on Mitsubishi WD380U-EST Projector?
If the menu on your Mitsubishi Projector can’t be used, press the POWER button to turn off the lamp and unplug the power cord from the wall outlet. Wait about 10 minutes, plug the power cord in, and try again.
What does “Temperature!!” displayed on my Mitsubishi Projector mean?
If your Mitsubishi Projector displays “Temperature!!”, eliminate any causes of the rise in the ambient temperature.
Is it normal for my Mitsubishi WD380U-EST exhaust vents emit warm air?
The emission of warm air from the exhaust vents of your Mitsubishi Projector is not a malfunction.
Why do the fans sound during standby on my Mitsubishi WD380U-EST Projector?
The fan sound during standby on your Mitsubishi Projector is to cool down the projector operating various functions and is not a malfunction.
General| Brand | Mitsubishi |
|---|---|
| Model | WD380U-EST |
| Category | Projector |
| Language | English |
Detailed diagram and listing of all buttons on the remote control.
Diagrams and tables showing projection distances and image sizes for the XD360-EST.
Diagrams and tables showing projection distances and image sizes for the WD380U-EST.
Instructions for mounting the projector on a ceiling for front projection.
Guidance on installing the projector for rear projection.
Details on using screw holes for securing a ceiling mount bracket.
Illustrates connections for standard AV equipment like VCRs.
Details on connecting DVD players or HDTVs, including YCbCr/YPbPr inputs.
Specific instructions for connecting devices via HDMI for video and audio.
Instructions for connecting a computer, focusing on Mini D-SUB and audio.
Attaching power cord, plugging in, and removing lens cap before projection.
How to adjust the projector's tilt for optimal image alignment.
Detailed procedure for turning the projector on and initial warm-up.
How to change the projected image's width-to-height ratio.
Procedure for safely turning off the projector.
Requirements and steps for viewing 3D content.
Settings related to image quality like brightness, contrast, and color.
Settings for network connectivity and IP configuration.
Step-by-step guide on navigating and changing settings within the projector's menu.
Specific settings and functions available within the Network Config menu.
Step-by-step guide to adjust image brightness and contrast.
Adjusting computer-generated images for proper display.
Setting up the projector's IP address and subnet mask.
Configuring wireless network parameters.
Detailed steps for manually setting the projector's IP address.
Projecting computer images over a wired or wireless LAN.
Projecting JPEG images and PtG contents from USB without a computer.
Enabling and using a password to restrict projector operation.
Using a computer to monitor and control the projector via LAN.
List of commands supported by the PJLink™ protocol for projector control.
Step-by-step guide for lamp replacement when projector is on a table.
Steps for replacing the lamp when the projector is ceiling-mounted.
Information on recommended lamp replacement intervals and indicators.
Solutions for issues where the projector fails to power on.
Troubleshooting steps when no image is projected.
Solutions for when the projector unexpectedly shuts down.
Steps to resolve issues with image display quality and alignment.
Identifying and resolving problems indicated by abnormal light patterns.
To Next Page
