Mitte Home - Inserting the Mitte CO2 Cylinder

46
4.4. Inserting the Mitte CO Cylinder
WARNING
Risk of explosion: The CO cylinder is under pressure
Be careful when handling it.
Do not shake the CO cylinder immediately before inserting it.
6.5. Inserting the CO2 cylinder
3
4
1
2
1. Remove the plastic seal and cap from
the valve at the top of the Mitte CO
cylinder.
2. Open the CO cylinder door on the left.
3. Place the cylinder vertically in the
device.
4. Raise the cylinder until it meets the
connection point and insert the cylinder
valve into the port. Screw in the cylinder
to the right until it is tight.