56
7. Maintenance
WARNING
Electrical hazard
Please switch o the device before cleaning.
Risk of hand injuries
Be careful when inserting the Mitte cartridge, cylinder, and bottle.
7.1. Cleaning
NOTICE
Do not use harsh or abrasive cleaning agents.
Never clean the device under running water.
Do not immerse the device in water.
Only clean accessible surfaces. Do not disassemble the device.
If necessary, clean the outer surfaces using a slightly damp cloth with a small amount of
mild detergent. Then, fully dry the device.
Clean the bottle and the lid after each use with warm running water (up to max. 40°C)
and mild detergent. We recommend the use of a bottle brush. The glass bottle is
dishwasher safe.
If necessary, clean the Water Tank with warm running water (up to max. 40°C) and mild
detergent.
7.2. Flushing the Mitte Cartridge
From time to time, your Mitte Cartridge should be ushed to ensure optimal
performance.
• If you have not used your cartridge for more than 2 days, we recommend that you ush
the cartridge. Dispense still water and discard of the water. This bottle of water will not
be deducted from the cartridge capacity.
• If you have not used the cartridge for 7 days, your cartridge will need to be ushed.
This mandatory ush works exactly like a cartridge activation, see chapter 4.7. This
bottle of water will not be deducted from the cartridge capacity.
To Next Page
Loading...