49
4.6. Filling the Water Tank
NOTICE
The water tank is not dishwasher safe. Clean the water tank with
warm running water (max. 40°C) and mild detergent.
Do not ll the Water Tank while it is attached to the device.
Do not ll the Water Tank during the dispensing process.
3
1
2
1. Remove the water tank and clean it
before use with warm tap water and
mild detergent.
2. Fill the water tank with cold tap water
up to the minimum ll line. In order to
get the best carbonation results, it is
important to always ll above the line
so that the carbonation nozzle on the
dispense head is submerged in water
while carbonating.
3. Return the water tank into place on the
top right of the device.
EN
To Next Page
Loading...