Mituoyo U-WAVE - U-WAVE-R Receiver Configuration; Configuring the U-WAVE-R Receiver

MeasurLink



and U-WAVE
®
26
 U-WAVE-R (Receiver) Setup
 To Setup U-WAVE-R (Receiver)
1. If the U-WAVE-R box at the top of this dialog is empty, Click Edit
in the top right corner to add the U-WAVE-R device.
The factory assigned U-WAVE-R ID is the Device ID on the
U-WAVE-R setting information dialog.
Click Edit to
add U-WAVE-
R device
Factory assigned
U-WAVE-R
Device ID