1 Overview
4
No. 99MBC109B
1.3.2 Rear Side of the Main Body
EH-102P (2-axis model) EH-101P (1-axis model)
① ② ③ ④
⑤ ⑥ ⑦ ⑧ ⑨ ⑩⑪
① ② ④
⑤ ⑥ ⑦ ⑧ ⑨ ⑩⑪
EH-102Z EH-102S EH-102D
③ ④ ③ ④ ③ ④
Tips
The shape and position of the Linear Gage input connectors differ by model.
Symbol
Name Description
①
RS_LINK connector (IN)
For connecting an RS LINK connection cable.
Also used for the SENSORPAK dongle.
②
RS_LINK connector (OUT)
For connecting an RS LINK connection cable.
Also used for Digimatic output.
③
Linear Gage input connector
B
For connecting a Linear Gage. The
Linear Gage connected to this is
referred to as INPUT B.
④
Linear Gage input connector
A
For connecting a Linear Gage. The
Linear Gage connected to this is
referred to as INPUT A.
⑤
RS-232C connector
For connecting an RS-232C connecting cable.
⑥
USB connector For connecting a USB connecting cable.
⑦
Grounding terminal For connecting a grounding wire.
⑧
I/O connector For connecting an I/O connecting cable.
⑨
Cable clamp For securing the power cable.
⑩
DC jack For connecting the AC adapter.
⑪
Power switch For turning the power on and off.
To Next Page
Loading...