Mitutoyo ID-C1012MNXB - 5 Setting Parameters

23
No. 99MAH056A
4 Measurement Method
(Short press) / (Long press)
1 Conrmthattheproductisinabsolutemeasurement(INCdisplayis
turnedo󰀨).
Tips
If set to incremental measurement, switch the measurement system to absolute
measurement. For details, see
"3.5 Switching Measurement Systems" on page 18.
2 Press and hold the [F2] key to start the origin setting (presetting).
» Preset display ([P]) will blink and the previous preset value will be displayed.
3 Setting the preset value
1 Press and hold the [F2] key.
» The sign will blink and the preset value can be changed.
2 Press the [F1] key or [F3] key.
» Each time the key is pressed, it will switch the sign.
3 Press the [F2] key.
» Thesignisconrmedandtheneighboringdigitblinks.
4 Press the [F1] key or [F3] key.
» Each time the key is pressed, the value will change by one.
5 Press the [F2] key.
» Thenumberisconrmedandtheneighboringdigitblinks.
» Each time the key is pressed, the blinking digit moves to the right.
6 Repeat steps 4 to 5aboveuntilthenumbersforalldigitsareconrmed.
» Conrmingthelastdigitwillcausepresetdisplay([P])toblink.
4 Press the [F2] key to exit the origin setting (presetting).
» Thepresetdisplayturnso󰀨andthesettingisconcluded.
Tips
• Press and hold the [F1] key to cancel the preset setting.
• If the preset value is incorrect, press and hold the [F2] key and redo from step
3 .