Mitutoyo QM-Height QMH-24"BX - Page 52

38
3SpecicUsageApplications
No. 99MAF600B
5
Measure the height of s3.
6
While the measurement value for s3 is displayed, press and hold [Outside diameter measure-
ment] until a beep sound is made.
M1 M2
» The measurement value for s3 is stored in the memory,
and [M2] (memory 2), which indicates the location of
storage in the memory, is displayed on the bottom left of
the LCD.
7
Calculatethedi󰀨erencebetweentwomeasurementvaluesstoredinmemory.
1 Press [MODE] twice. » Characters will be displayed
in the bottom row of the LCD.
2 Press [Inside diameter measurement] to
select [M1-M2] (memory calculation).
M1 M2
» Thedi󰀨erencebetweentwo
measurement values stored
in [M1] and [M2] will be dis-
played.
Tips
When[↓]ispressed,[M1/M2]willbedisplayedtogetherwiththeratiooftwomeasurementvalues.
8
Press [CANCEL] twice.
» The memory calculation will be cleared, and the regular
condition will be restored.