Locating hardware & software manuals and guides
System manuals are provided exclusively in electronic (PDF) format.
• Access via MKAT Software: Start either the MKAT Runner or Editor software. Click
on the help button within the software. The corresponding manual will open in
PDF format.
• Access via File Location: Manuals and guides may also be available in the following
le location, depending on your system con guration: C:\Program Files\MK Test
Systems\MKAT\Documents
Resolving “Interlock is broken” message in MKAT software
This message refers to an issue with the interlock system connected to the main
subrack auxiliary socket.
• Firstly, ensure the auxiliary plug is properly tted into the auxiliary socket on the
main subrack. If the auxiliary plug is wired to an external device such as a safety
switch, ensure that the device is closed.
• Alternatively, check the connection by removing the auxiliary plug and ensuring
there is a connection between pins 1 and 2. Then, replace the auxiliary plug.
Note: This interlock should not be confused with the safety system interlock.
11
PREVENTATIVE MAINTENANCE
We recommend you carry out preventative maintenance when you invest in an MK
test system. By regularly checking for - and xing - small issues, preventative
maintenance helps reduce downtime and keeps the test process safe as well as
accurate.
• Do conduct a Self Test regularly - see the main user manual for details.
• Do carry out frequent visual checks on interface connectors & LEDs.
• Do maintain a good level of cleanliness around the system.
• Do book annual calibrations to ensure the system stays within operational
parameters.
• Do consult MK Test engineers to support any additional requirements.
• Do not open the system; there are no serviceable parts inside.
• Do not use any non-ESD cleaning solutions.
To Next Page
Loading...