MKS SG 1024 - Connectors and Accessories; Connector #1 Wiring Diagram; RF Coax Accessories and Cables

File: SG1024_r1eng - April 2017 - Technical note: SG 1024 page 11 of 16
PM 250
SG 1024
Connector # 1 wiring
Conn # 3: RF Coax Accessories
The 7/16 type female connector #3, installed on the rear panel, is the microwave output of the SG 524. To carry the microwave
energy from the generator to the cavity/applicator we may offer several accessories, including a coax cable with length on
request.
Pos. Description Part Number Note
1 7/16 M-F Right Angle Plug
MWCOAX7/16L
2 Coax Cable 1/2” with 7/16 Plugs, l= 1m
441384810/1
Preferred size, other length on request, max 2 m
Coax Cable 7/8” with 7/16 Plugs, l= 1m
441384811/1
Other length on request, max 4 m
3 Transition 7/16 to WR340
MWR26-COAX7/16L
Aluminum construction. Flange R26 style
Transition 7/16 to WR284
MWR32-COAX7/16L
Aluminum construction. Flange R32 style
Notethatthetwocablesareonlysligthlyexibleandcanbepartiallyshaped.Thesecablearedesignedforstationaryinstallation
only, can not be used on a mobile set-up.
Coax cable
type
Nominal
size [inches]
Attenuation dB/1 m
@ 2450 MHz
Avg Power @
2.450 MHz
Outer Diam
Jacket mm [“]
Min Bend Radius,
multiple bends, mm [“]
RF5012 1/2 0.121 0.63 kW 13.8 [0.54] 125 [5]
RF5078 7/8 0.069 1.30 kW 27.5 [1.08] 254 [10]
1024