Operation MCG15
14
➤ Switch the cooler off.
➤ Pull out the connection cable.
If you do not want to use the cooler for a longer period of time:
➤ Leave the lid slightly open. This prevents odor build-up.
6.9 Defrosting the cooler
Humidity can form frost in the interior of the cooling device or on the evapora-
tor. This reduces the cooling capacity.
A
To defrost the cooler, proceed as follows:
➤ Take out the contents of the cooler.
➤ If necessary, place them in another cooling device to keep them cool.
➤ Switch off the device.
➤ Leave the lid open.
➤ Wipe off the defrosted water.
6.10 Replacing the fuse
!
➤ Disconnect the power supply to the device.
➤ Remove the connection cable.
➤ Replace the fuse (8 A 32 V) as shown (fig. 4, page 3).
➤ Reconnect the power supply to the device.
NOTICE! Damage hazard
Failure to obey this instruction may result in damage to the device.
Never use hard or pointed tools to remove ice or to loosen objects
which have frozen in place.
WARNING! Electrocution hazard
Failure to obey this warning will result in death or serious injury.
Disconnect the power supply and the connection cable before you
replace the device fuse.
MobicoolMCG15_OPM_4445103306_EMEA16_202x-xx-xx.book Seite 14 Freitag, 16. April 2021 2:17 14
To Next Page
Loading...
Need help?
General
Weight and Dimensions
