MobileView 7000 Series User Manual 56
Chapter 6
Use Cases
The following scenarios may be useful in a work environment.
Screen Snaps
Screen snaps of each video tile are available from the Video Live page. A screen snap records the
visible items displayed at a given time. These are especially useful when setting up cameras with a
customer and deciding on the angle of the camera. Once the camera is set in place, take a screen snap
of the image display. Give the customer a print out of the snap and verify this is what the customer
expects to view from the camera before completing the setup process.
Camera Device List
Click Camera and Manage IP Devices. All of the cameras expected to be found should display in
the list. If any new cameras are set to defaults, they can be easily found and added to the list by using
the finder utility. Click Finder. On the Device/Finder window, click Refresh. Any new cameras
display in the list. If a camera is already in the list, it does not display in the finder.
Deciding Video Stream
When choosing a type of video stream to select, we recommended using Alternate. If the customer
prefers still shots, alternates are sufficient. If they are requesting video, select Primary or Alarm
stream.
Install a Wireless Card
A wireless card comes with a plate. Using a screwdriver, remove the plate and install the wireless
card.
To Next Page