up-line all characters including space when up-line selected.
[Reference]：ESC !
4.2.7 ESC i n
[Name]: Select/cancel white/black inverted print
[Format]: ASCII ESC i n
Hexadecimal 1B 69 n
Decimal 27 105 n
[Description]: If n=1, select white/black inverted print; n=0, cancel
white/black inverted print.
4.2.8 ESC c n
[Name]: Select/cancel upside-down print
[Format]: ASCII ESC i n
Hexadecimal 1B 63 n
Decimal 27 99 n
[Description]: When n=1, select upside-down print; n=0, cancel
upside-down print. Upside-down print is effective for not only character,
also graphics. However, when upside-down printing for graphics, please
pay attention to the printing sequence, details please refer to ESC K
command.
4.3 Print Setting Commands
4.3.1 ESC $ nL nH
[Name]: Set absolute print position
[Format]: ASCII ESC $ nL nH
Hexadecimal 1B 24 nL nH
Decimal 27 36 nL nH
[Range]: 0 ≤ nL ≤ 255; 0 ≤ nH ≤ 1
[Description]: Sets the distance from the beginning of the line to the
position at which subsequent characters are to be printed.
The distance from the beginning of the line to the print position is
[( nL + nH
×
256) (vertical or horizontal motion unit)] inches.
[Notice]: Settings outside the specified printable area are ignored.
[Reference]: ESC \
4.3.2 ESC D n1 n2…nk NULL
[Name]: Set horizontal tab position
[Format]: ASCII ESC D n1 n2 n3… NULL
To Next Page
Loading...