PART NUMBER DESCRIPTION QUANTITY APPLICATION / USE PICTURE
00-01-002116 AIRTHREAD TENSION TUMBLER 2
CRADLES FLOWER DURING TRIMMING AND FACILITATES
BLADE ACCESS. PLANT-TOUCHING COMPONENT TO BE
REPLACED DURING A HOT SWAP.
00-01-000512 HELICAL BLADE ASSEMBLY 3
AS REQUIRED TO HOT SWAP 1 M108S.
PLANT-TOUCHING COMPONENT TO BE REPLACED
DURING A HOT SWAP.
00-01-000583 BED KNIFE ASSEMBLY 3
BOX OF 3 KNIVES AS REQUIRED TO HOT SWAP 1 M108S.
PLANT-TOUCHING COMPONENT TO BE REPLACED
DURING A HOT SWAP.
00-01-000587 SPACER BAR 3
BOX OF 3 BARS AS REQUIRED TO HOT SWAP 1 M108S.
PLANT-TOUCHING COMPONENT TO BE REPLACED
DURING A HOT SWAP.
00-01-002327 TRIM TOTE WITH GASKET 2
TRIM RECEPTACLE COMPONENT OF INTEGRATED
SEPARATOR SYSTEM. PLANT-TOUCHING COMPONENT TO
BE REPLACED DURING A HOT SWAP.
00-01-000510 BRUSH ASSEMBLY 1
ENSURES FLOWER FLOW IN TUMBLER. PLANT-TOUCHING
COMPONENT TO BE REPLACED DURING A HOT SWAP.
HOT SWAP KIT
PART DESCRIPTIONS & INTENDED USES
To Next Page
Loading...