SAFETY INSTRUCTIONS
To ensure operator safety while in use, this device includes decals, guarding, and other
safety features. Operators are encouraged to use caution and best judgment when using
equipment. Equipment should be serviced when required.
To avoid possible damage to the machine and risk of injury to the operator, consult with an
Eteros Technologies representative to answer any questions.
All operators must read and understand this User Guide and be trained in safe operation
and use of the machine. We recommend the owner of this equipment develop a standard
operating procedure (SOP) specific to each worksite to address any local hazards or other
conditions not outlined in this User Guide. The machine must be inspected regularly for
damage, component failure, and wear. Results of inspection activity should be
documented.
Eteros Technologies makes every effort to ensure the machine is compliant with all current
safety standards. It is the responsibility of the owner to ensure all municipal, provincial,
state, county, territorial, and federal codes, regulations, and standards have been met in
each working location.
Do not lend or rent your machine without providing the User Guide. A first-time operator
should receive practical instruction before using the machine.
This machine is not to be used for any purpose other than those expressly stated in the
User Guide, advertising literature, or other Eteros Technologies written material pertaining
to the machine.
GENERAL SAFETY PRECAUTIONS
1. READ and become familiar with the entire User Guide. Learn the equipment
applications, limitations, and possible hazards.
2. IDENTIFY AND FOLLOW WARNING LABELS on the machine.
3. DO NOT USE THE MACHINE IN A DANGEROUS ENVIRONMENT or damp or wet
locations. Never expose the control panel directly to rain or water. Keep the work area
well illuminated.
4. DO NOT use the device in the presence of flammable liquids or gasses.
5. KEEP WORK AREA CLEAN. Cluttered areas and workspaces invite accidents.
MOBIUS M108S USER GUIDE 6
To Next Page
Loading...
