41
RF Type
RF Modulation
Eective Radiated Power
Data Throughput
Expected Delay (Latency Range)
in Wireless (RF) Communication
Integrity
Security
Wireless Operation Distance
RF Frequency /
Need for Spectrum Management
Maximum Limitation
Maximum Permitted Power
Proximity of Other In-band
Transmitters Used in Vicinity
Wireless Communication Prole
Wireless Coexistence
System requirement of the
Bluetooth device
Bluetooth 4.0 BLE
GFSK
0 dBm
0.2 Mbps
The latency time is less than 0.3 ms second
from sender to receiver.
Channel Quality-Driven Data Rate (CQDDR)
technology increases the eective data rate and
integrity in noisy environments.
AES-128 and application layer user dened
Class 2 (Maximum: 10 meter)
2402 - 2480 MHz (allowing for guard bands)
Unlimited
5 mW
Up to 40 bands (2 MHz spacing; centered
from 2402 to 2480 MHz)
GATT – Client and Server
Support for 802.11 Coexistence
Bluetooth 4.0 for Android 4.3 or above
Bluetooth 4.0 for iOS 7.0 or above
MOCACu
Oscillometric
0~300mmHg
40 ~ 280 mmHg
40 ~ 199 beats/minute
Pressure: ±3 mmHg
Pulse: ±5 % Max.
Automatic Ination (Air Pump)
Automatic Air Release Control Valve.
Liquid Crystal Display
99 Memory Total for one user.
74 X 74.5 X 30.5 mm (L X W X H)
2.91 X 2.93 X 1.20 inch (L X W X H)
97.5g±10g (3.44oz±0.35oz)
135 ~ 195 mm (approx. 5.3 ~ 7.7 inch)
Temperature: -25 °C ~ 70 °C (-13 °F ~ 158 °F)
Humidity: ≤ 93 % R.H.
Temperature: 5 °C ~ 40 °C (41 °F ~ 104 °F)
Humidity: 15 % ~ 93 % R.H.
Atmospheric pressure: 700 hPa ~ 1060 hPa
DC 3 V, AAA “LR03” (1.5 V) Alkaline Battery x 2
Approx. 200 Measurements
5 Years (4 times per day)
Without any operation for 1 minute, device
automatically shuts o.
Instruction Manual, 2 AAA (LR03) Alkaline
Batteries, Storage Case
*The contents of this manual and the specications of the device covered by this
manual are subject to change for improvement without notice.
Specifications