35
Maintenance and Storage
General Use
Maintenance
• Do not in any way twist the cu.
• Do not press button if the cu is not wrapped around the wrist.
• Do not drop the product and avoid any strong impacts.
• Use a piece of cloth with water or mild cleansing agent to wipe
the device and dry it immediately with a dry cloth.
• Do not use detergent or any strong chemicals to clean the device.
• Disinfection - Use a piece of cloth with a dilution of neutral
detergent or soapsuds to wipe the surface of the cu for 10 seconds.
• Make sure the cu is completely dry before using.
• Do not attempt to disassemble or change any parts of the
monitor, including wrist cu, due to substitution of a component
dierent from that supplied might result in measurement error.
• If any suggestion or service is requested, please consult your
service station.
To Next Page
Loading...