Mocka Blake Series - Step 1: Base Panel Preparation; Insert Dowels (A) and Bolts (C) into Panel [1]; Step 2: Attach Wheels to Side Panels; Secure Wheels (G, H) to Panels [7] and [8]

Blake Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
2
1
2
1
Insert 6x dowels (A) and 6x bolts (C) into panel [1].
Tighten with a screwdriver.
Attach 2x wheels (G) and (H) to each panel [7] and [8] as shown,
and secure with 32x small screws (E). Tighten with a screwdriver.
A
C
7
8
H
G
E
E
H
G
E
E