Mocka Blake Series - Step 3: Assemble Main Frame; Attach Side and Divider Panels to Base; Step 4: Install Back Panel; Slide Back Panel [6] into Grooves

Blake Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
3
3 4
Attach panels [2] , [3] and [5] to panel [1] and secure with
6x locking nuts (D). Tighten with a screwdriver.
Slide panel [6] between the grooves of panels [2] ,[3] ,[5] and [1] to
form the back of the unit, as shown.
2
3
5
1
D
D
D
D
6
2
3
5
1