Mocka Blake Series - Step 5: Attach Top Panel; Insert Dowels (A) and Secure Top Panel [4]; Step 6: Attach Legs and Felt Pads; Secure Legs [9] with Hardware

Blake Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
4
5 6
Insert 6x dowels (A) into the ends of panels [2], [3] and [5].
Attach panel [4] to the unit and secure with 6x screws (N).
Tighten with a screwdriver.
Attach 4x legs [9] to panel [4] with 8x washers (B), 8x spring washers (L)
and 8x bolts (M). Tighten with an Allen key (F). Apply 4x felt pads (K) to
legs [9] as shown.
2
3
A
4
5
N
B
B
M
M
9
K
4
L
L
F