English 30
Temperature sensor (ED 850):
In the process, temperature sensor humidity levels inducing clothing, so the sensor surface should
certainly always in immaculate condition.
Replacing the lamp (ED 850):
1. Open the door of the unit, remove the screws
that are in the drum lights and remove the lamp.
2. Remove the light bulb by turning counter-
clockwise, being careful not to drop the bulb.
3. Put the new bulb, make sure the light bulb is
installed correctly and tight
4. Replace the lamp cover.
Important Safety Instructions should always be noticed when using this dryer:
- Clothes with metal accessories are not allowed to be dried with dryer. Dryer will be damaged if
the metal accessories are detached off when drying. Please use the drying rack to dry clothes
with metal accessories.
- Read all instructions meticulously before operating.
- Make sure the voltage printed on the dryer is suitable to the voltage at your home before
connecting this dryer to the electricity source.
- To avoid the possibility of fire:
a. Do not dry clothes which have been washed/soaked/sprinkled by gas, liquid solvent for dry
cleaning or other flammable liquids because those liquids produce gas that trigger explosion.
b. Clothes which are made up of latex or its kind are not allowed to be dried at hot temperature.
These materials, when heated at certain conditions, may produce fire spontaneously.
- Do not operate this dryer if the electricity wire or plugs are damaged, and do not function
accordingly.
- Do not alter or modify the specifications of the product in any form they may cause hazards.
- Make sure the power cable is not crushed by the unit.
- All forms of electrical work associated with the installation of this unit at the time, should be done
by experts who is professional.
- Important!! The unit is not and is not to be installed in a built-in.
- If the unit is moved, transportation must be done vertically.
To Next Page
Loading...
