Modena ED Series - Appendix: Dryer Error Codes

English 35
The following error code that probably appear on the display of dryer machine:
No
MALFUNCTION
Error
Code
POSSIBLE CAUSE
SOLUTION
1
temperature
sensor
E1
1. Whether the sensor is malfunctioning?
2. Is the plug plugged in firmly?
3. Is it short-circuit?
1. replace the sensor
2. re-plug in
3. replace the wire
2
heating wire
temperature
sensor open-
circuit or
short-circuit
E3
1. Is the heating wire temperature sensor
malfunctioning?
2. Whether the plug is plugged in firmly?
3. Is it short-circuit?
1. re-plug in
2. replace the wire
3. replace the heating wire
3
heating wire
assembly
E2
1. Is the plug plugged in firmly?
2. Whether the heating wire is
malfunctioned?
1. re-plug in the plug
2. replace the heating wire
4
door open
dop
1. Is the plug plugged in firmly?
2. Whether the Micro-switch is
malfunctioned?
1. re-plug in the plug
2. replace the Micro-switch
6
condenser
E6
1. Is the condenser installed not good
enough?
2. Is the Micro-switch malfunctioned?
3. Is the plug contact poor?
Re-install condenser in the right
way.
replace the Micro-switch
Appendix: Error Code