ENGNORSWE DANFINPOLRUS
27
Cleaning
ENG
9 Changing the batteries
The symbol in the display and in the Alpha IP app indicates low battery voltage.
Replacing the batteries:
1. Take off the device from the installation bottom (see page 5, fig. 4).
2. Remove the batteries from the back side.
3. Insert two new batteries (type LR03/Micro/AAA) according to the marking.
4. Position the room control unit Display onto the installation bottom and latch
it in.
9 The display changes to normal indication.
9 The device is ready to operate.
10 Cleaning
Clean the device with a soft, clean, dry, and lint-free cloth. In order to remove heavy
contamination, moisten the cloth slightly with lukewarm water. Use a solvent-free
detergent for cleaning.
To Next Page
Loading...
