User Manual v1.5
Page 41 of 64
How to do a Firmware Upgrade:
There are 2 ways to do an update.
One is if you have internet access, you can do a remote update.
This is located in Basic Mode --> System --> Remote Update
If you do not have internet access on the router, you may have to do a manual firmware
update
Go to www.mofinetwork.com
Then go to support then download
At this point, you will need to ensure you are downloading and installing the correct firmware
for your device.
Currently there is the MOFI4500 V1, V2 and V3 model
The V1 model does not say V1. If it does not say V2 or V3, this it is V1.
For the V3 and V3 model, it will say on the top as well on the bottom of the router.
For the V3 model, the serial number will start with MOFI4500V3
Download section to get the latest firmware
Follow the instructions there on how to do the update.
If you make a mistake or an error and the router is non functional, look at our section below
on how to do a MOFI Recovery.
To Next Page
Loading...
Need help?
General
