User Manual v1.5
Page 58 of 64
In some cases, you might not want to use port 80 which is set as default in the
router.
If you want to use this, you will have to de-select port 80 that is in the router.
To do this, go to Mofi Business --> Webserver
For the HTTP Port, change it from the default 80/81/8080 to 8080 which is the most
common, then click on save.
If you change the http port to 8080 for example, to access the router locally, you
will need to go to
http://192.168.10.1: 8080 or http://yourpublicIP:8080
After you reboot the router, to access the router again, you will need to go to
http://192.168.10.1:8080
or
http://YourPublicIPAddress:8080
Since the MOFI router is not using port 80 now by default, you can use this for your
device that might need port 80.
To Next Page
Loading...
Need help?
General
