Admin Manual
MWP1100A
30
▣ Web-based setting
Web-based setting uses a user-friendly Web browser to set the phone and check phone information. Since a
computer is used, it’s much more convenient to use than the button-based setting method.
MWP1100(A) uses a Web-configured security system to manage accounts, so it blocks access by people other
than the phone administrator. On the address box of the Web browser, enter the IP address as below. Then, you
can use the configuration menu of MWP1100A
Checking IP address
▣ Checking procedure
[Menu] ▶ 8. System info ▶ 3. Network info
▣ Access method
- In case the IP address of the phone is 192.168.15.47, enter http://192.168.15.47:8000 and then the
authentication window will pop up as below..
- In an authentication window as below, enter “admin” for user name (U) and “9999” for the password (P).
You can use the Web configuration menu in this admin mode.
To Next Page
Loading...