Admin Manual
MWP1100A
40
Advanced
▣ Advanced SIP Config
♦ Local SIP Port : In general, the SIP standards use the UDP 5060 port. In case the server or service uses a
different port, enter the SIP port number supported by the server or service.
♦ Register Expiration : The SIP protocol is designed to periodically re-register user information in the
Registrar server. The user can set the re-registering time. If the user-entered time is sent to the server, it’s
reviewed by the server and sent back. The re-registration is done at a time interval.
To Next Page
Loading...